ZKLN60110-2Z-XL
Axial angular contact ball bearing
Axial angular contact ball bearings ZKLN..-2Z, double direction, gap seals on both sides
Replaces
ZKLN 60110.2Z, ZKLN60110-2Z
Description
Metric
Imperial
Main Dimensions & Performance Data
| d | 60 mm | Bore diameter |
| 0 mm | Bore diameter upper tolerance | |
| -0.008 mm | Bore diameter lower tolerance | |
| D | 110 mm | Outside diameter |
| 0 mm | Outside diameter upper tolerance | |
| -0.015 mm | Outside diameter lower tolerance | |
| B | 45 mm | Width |
| 0 mm | Width upper tolerance | |
| -0.25 mm | Width lower tolerance | |
| Ca | 93,000 N | Basic dynamic load rating, axial |
| C0a | 214,000 N | Basic static load rating, axial |
| Cua | 13,000 N | Fatigue load limit, axial |
| nG Grease | 4,000 1/min | Limiting speed for grease lubrication |
| nϑ | 3,000 1/min | Thermally safe operating speed |
| MR | 1 Nm | Bearing frictional torque |
| ≈m | 1.8 kg | Weight |
Mounting dimensions
| Da max | 100 mm | Maximum diameter of housing |
| da min | 82 mm | Minimum diameter shaft |
Dimensions
| d1 | 85 mm | Rib diameter inner ring |
| rmin | 0.6 mm | Minimum chamfer dimension |
| r1 min | 0.6 mm | Minimum chamfer dimension |
| α | 60 ° | Contact angle |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 120 °C | Operating temperature max. |
Additional information
| caL | 1,300 N/µm | Rigidity axial |
| ckL | 1,650 Nm/mrad | Tilting rigidity |
| Mm | 13.7 kg*cm2 | Mass moment of inertia |
| 3 µm | Axial runout | |
| ZMA60/98 | Recommended INA precision locknut for radial locking | |
| AM60 | Recommended INA precision locknut for axial locking | |
| MA | 100 Nm | Tightening torque for the recommended INA precision locknut |
| 16,700 N | Required locknut force axial |
Your current product variant
| Sealing | 2Z | Minimal gap seals on both sides |
| Tolerance class | Standard | Standard |
Characteristics
