W 617/3 R
Deep groove ball bearingSingle row deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They can accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
- Simple, versatile and robust design
- Low friction
- High-speed capability
- Accommodate radial and axial loads in both directions
- Require little maintenance
Description
Dimensions
| d | 3 mm | Bore diameter |
|---|---|---|
| D | 6 mm | Outside diameter |
| B | 2 mm | Width |
| d1 | ≈ 3.7 mm | Shoulder diameter |
| D1 | ≈ 4.9 mm | Shoulder diameter |
| D2 | ≈ 4.9 mm | Recess diameter |
| D3 | 7.2 mm | Flange diameter |
| C | 0.6 mm | Flange width |
| r1,2 | min. 0.1 mm | Chamfer dimension |
Abutment dimensions
| da | min. 3.6 mm | Diameter of shaft abutment |
|---|---|---|
| ra | max. 0.1 mm | Radius of shaft or housing fillet |
Calculation data
| Basic dynamic load rating | C | 0.117 kN |
|---|---|---|
| Basic static load rating | C0 | 0.036 kN |
| Fatigue load limit | Pu | 0.002 kN |
| Reference speed | 170 000 r/min | |
| Limiting speed | 110 000 r/min | |
| Minimum load factor | kr | 0.015 |
| Calculation factor | f0 | 7.1 |
Mass
| Mass bearing | 0.0003 kg |
Tolerance class
| Dimensional tolerances | Normal |
| Radial run-out | Normal |
Tolerances and clearances
Bearing data
Bearing interfaces
