SONL 240-540 + 22240 CCK/W33 + H 3140
The combination of housings, bearings and accessories is an excellent choice for a customized, reliable and sustainable solution for your shaft arrangement. Has a wide range of high-quality housing designs and sizes to meet your specific challenge – including specially designed housings for special applications.
- Many variants
- Customized combinations
- Cost-efficient
- Reliable
- Sustainable
Description
Associated products
| Housing | SONL 240-540 |
| Seal kit for a through shaft | TSO 540 |
| Seal kit for a shaft end | TSO 540 A |
| End cover | ECO 240-540 |
| Bearing | 22240 CCK/W33 |
| Adapter sleeve | H 3140 |
| Locating ring | 2 x FRB 14/360 |
Dimensions
| da | 180 mm | Shaft diameter |
|---|---|---|
| Ca | 126 mm | Width of bearing seat |
| Da | 360 mm | Diameter of bearing seat |
| A | 338 mm | Width |
| A1 | 260 mm | Foot width |
| A2 | 229 mm | Distance housing centreline to oil level gauge side face |
| AA | 358 mm | Width for shaft end arrangement |
| AB | 378 mm | Width for through shaft arrangement |
| d1 | 227 mm | Outside diameter of seal |
| B1 | 140 mm | Width of seal |
| H | 510 mm | Height |
| H0 | 600 mm | Height including eye bolt |
| H1 | 275 mm | Centre height of bearing seat |
| H2 | 85 mm | Foot height |
| J | 600 mm | Distance between attachment bolts |
| J1 | 160 mm | Distance between attachment bolts |
| L | 730 mm | Length |
| N | 50 mm | Length of attachment bolt hole |
| N1 | 42 mm | Width of attachment bolt hole |
| S | 189 mm | Distance bearing centreline to seal end face |
| ba | 86 mm | Distance bearing centre line to shaft end |
|---|---|---|
| bb | 275 mm | Distance shaft end to seal side face |
| s2 | 51 mm | Distance shaft end to end cover |
| J6 | 630 mm | Distance between dowel pins |
|---|---|---|
| N4 | max.20 mm | Diameter of dowel pins |
| PG | G 3/4 | Size of tapped oil inlet hole in housing cap |
|---|---|---|
| P1 | 85 mm | Distance housing centre line to oil inlet, housing cap |
| P2 | 100 mm | Distance housing centre line to oil inlet, housing cap |
| RG | G 1.1/2 | Size of tapped oil outlet hole in housing base |
| R1 | 320 mm | Distance between oil outlets in housing base |
| R2 | 41 mm | Height of oil outlet position |
| O1 | 166 mm | Height housing bottom to oil level gauge top |
| O2 | 229 mm | Distance housing centre line to oil level gauge end |
Breaking loads, housing
| P55° | 4 950 kN | Breaking load |
|---|---|---|
| P90° | 2 000 kN | Breaking load |
| P120° | 1 380 kN | Breaking load |
| P150° | 1 270 kN | Breaking load |
| P180° | 1 650 kN | Breaking load |
| Pa | 660 kN | Breaking load |
Yield point, cap bolts
| Q120° | 1 800 kN | Load carrying ability of cap bolts |
|---|---|---|
| Q150° | 1 040 kN | Load carrying ability of cap bolts |
| Q180° | 900 kN | Load carrying ability of cap bolts |
Mass
| Mass housing | 273 kg |
Mounting information
| Size of cap bolt | M 24×160 | |
| Recommended tightening torque for cap bolts | 350 N·m | |
| Recommended diameter for attachment bolts | G | 36 mm |
| Recommended tightening torque for attachment bolts | 2 280 N·m | |
| Size of eye bolt | M 24 | |
| Oil level | min.88 mm | |
| Oil fill | min.3 l | |
| Oil level | max.125 mm | |
| Oil fill | max.4.5 l |
