SNLN 3044 + 23044 CCK/W33 + OH 3044 H
The combination of housings, bearings and accessories is an excellent choice for a customized, reliable and sustainable solution for your shaft arrangement. Has a wide range of high-quality housing designs and sizes to meet your specific challenge – including specially designed housings for special applications.
- Many variants
- Customized combinations
- Cost-efficient
- Reliable
- Sustainable
Description
Associated products
| Housing | SNLN 3044 |
| Bearing | 23044 CCK/W33 |
| Adapter sleeve | OH 3044 H |
| Locating ring | 2 x FRB 10/340 |
Dimensions
| da | 200 mm | Shaft diameter |
|---|---|---|
| Ca | 110 mm | Width of bearing seat |
| Da | 340 mm | Diameter of bearing seat |
| A | 260 mm | Width |
| A1 | 190 mm | Foot width |
| H | 403 mm | Height |
| H1 | 200 mm | Centre height of bearing seat |
| H2 | 70 mm | Foot height |
| J | 580 mm | Distance between attachment bolts |
| L | 690 mm | Length |
| N | 50 mm | Length of attachment bolt hole |
| N1 | 42 mm | Width of attachment bolt hole |
| ba | 89 mm | Distance bearing centre line to shaft end |
|---|---|---|
| bc | 108 mm | Distance bearing centre line to end cover |
| J6 | 644 mm | Distance between dowel pins |
|---|---|---|
| J7 | 72 mm | Axial offset of dowel pins |
| N4 | max.16 mm | Diameter of dowel pins |
| A2L | 285 mm | Width across labyrinth seals |
|---|---|---|
| A2T | 360 mm | Width across taconite seals |
| d2 | 330 mm | Diameter of seal |
Breaking loads, housing
| P55° | 1 700 kN | Breaking load |
|---|---|---|
| P90° | 1 020 kN | Breaking load |
| P120° | 760 kN | Breaking load |
| P150° | 680 kN | Breaking load |
| P180° | 850 kN | Breaking load |
| Pa | 300 kN | Breaking load |
Yield point, cap bolts
| Q120° | 1 430 kN | Load carrying ability of cap bolts |
|---|---|---|
| Q150° | 825 kN | Load carrying ability of cap bolts |
| Q180° | 715 kN | Load carrying ability of cap bolts |
Mass
| Mass housing | 103 kg |
Mounting information
| Size of cap bolt | M 30 x 170 | |
| Recommended tightening torque for cap bolts | 400 N·m | |
| Recommended diameter for attachment bolts | G | 36 mm |
| Recommended tightening torque for attachment bolts | 2 280 N·m | |
| Size of eye bolt | M12 | |
| Initial grease fill, 20% | 1 500 g | |
| Initial grease fill, 40% | 2 700 g |
