SNLN 3036 + 23036-2CS5K/VT143 + H 3036 E
The combination of housings, bearings and accessories is an excellent choice for a customized, reliable and sustainable solution for your shaft arrangement. Has a wide range of high-quality housing designs and sizes to meet your specific challenge – including specially designed housings for special applications.
- Many variants
- Customized combinations
- Cost-efficient
- Reliable
- Sustainable
Description
Associated products
| Housing | SNLN 3036 |
| Bearing | 23036 CCK/W33 |
| Adapter sleeve | H 3036 |
| Locating ring | 2 x FRB 10/280 |
Dimensions
| da | 160 mm | Shaft diameter |
|---|---|---|
| Ca | 94 mm | Width of bearing seat |
| Da | 280 mm | Diameter of bearing seat |
| A | 225 mm | Width |
| A1 | 160 mm | Foot width |
| H | 342 mm | Height |
| H1 | 170 mm | Centre height of bearing seat |
| H2 | 60 mm | Foot height |
| J | 470 mm | Distance between attachment bolts |
| L | 550 mm | Length |
| N | 42 mm | Length of attachment bolt hole |
| N1 | 35 mm | Width of attachment bolt hole |
| ba | 69 mm | Distance bearing centre line to shaft end |
|---|---|---|
| bc | 94 mm | Distance bearing centre line to end cover |
| J6 | 506 mm | Distance between dowel pins |
|---|---|---|
| J7 | 58 mm | Axial offset of dowel pins |
| N4 | max.12 mm | Diameter of dowel pins |
| A2L | 245 mm | Width across labyrinth seals |
|---|---|---|
| A2T | 315 mm | Width across taconite seals |
| d2 | 290 mm | Diameter of seal |
Breaking loads, housing
| P55° | 1 160 kN | Breaking load |
|---|---|---|
| P90° | 700 kN | Breaking load |
| P120° | 520 kN | Breaking load |
| P150° | 460 kN | Breaking load |
| P180° | 580 kN | Breaking load |
| Pa | 200 kN | Breaking load |
Yield point, cap bolts
| Q120° | 900 kN | Load carrying ability of cap bolts |
|---|---|---|
| Q150° | 520 kN | Load carrying ability of cap bolts |
| Q180° | 450 kN | Load carrying ability of cap bolts |
Mass
| Mass housing | 58.5 kg |
Mounting information
| Size of cap bolt | M 24 x 130 | |
| Recommended tightening torque for cap bolts | 350 N·m | |
| Recommended diameter for attachment bolts | G | 30 mm |
| Recommended tightening torque for attachment bolts | 1 310 N·m | |
| Size of eye bolt | M12 | |
| Initial grease fill, 20% | 950 g | |
| Initial grease fill, 40% | 1 800 g |
