SNLN 3024 + 23024 CCK/W33 + H 3024
The combination of housings, bearings and accessories is an excellent choice for a customized, reliable and sustainable solution for your shaft arrangement. Has a wide range of high-quality housing designs and sizes to meet your specific challenge – including specially designed housings for special applications.
- Many variants
- Customized combinations
- Cost-efficient
- Reliable
- Sustainable
Description
Associated products
| Housing | SNLN 3024 |
| Bearing | 23024 CCK/W33 |
| Adapter sleeve | H 3024 |
| Locating ring | 2 x FRB 12/180 |
Dimensions
| da | 110 mm | Shaft diameter |
|---|---|---|
| Ca | 70 mm | Width of bearing seat |
| Da | 180 mm | Diameter of bearing seat |
| A | 160 mm | Width |
| A1 | 110 mm | Foot width |
| H | 218 mm | Height |
| H1 | 112 mm | Centre height of bearing seat |
| H2 | 40 mm | Foot height |
| J | 320 mm | Distance between attachment bolts |
| L | 380 mm | Length |
| N | 32 mm | Length of attachment bolt hole |
| N1 | 26 mm | Width of attachment bolt hole |
| ba | 48 mm | Distance bearing centre line to shaft end |
|---|---|---|
| bc | 70 mm | Distance bearing centre line to end cover |
| J6 | 348 mm | Distance between dowel pins |
|---|---|---|
| J7 | 39 mm | Axial offset of dowel pins |
| N4 | max.8 mm | Diameter of dowel pins |
| A2L | 180 mm | Width across labyrinth seals |
|---|---|---|
| A2T | 240 mm | Width across taconite seals |
| d2 | 201 mm | Diameter of seal |
Breaking loads, housing
| P55° | 520 kN | Breaking load |
|---|---|---|
| P90° | 310 kN | Breaking load |
| P120° | 230 kN | Breaking load |
| P150° | 210 kN | Breaking load |
| P180° | 260 kN | Breaking load |
| Pa | 90 kN | Breaking load |
Yield point, cap bolts
| Q120° | 620 kN | Load carrying ability of cap bolts |
|---|---|---|
| Q150° | 360 kN | Load carrying ability of cap bolts |
| Q180° | 310 kN | Load carrying ability of cap bolts |
Mass
| Mass housing | 17.5 kg |
Mounting information
| Size of cap bolt | M 20 x 100 | |
| Recommended tightening torque for cap bolts | 200 N·m | |
| Recommended diameter for attachment bolts | G | 24 mm |
| Recommended tightening torque for attachment bolts | 665 N·m | |
| Initial grease fill, 20% | 250 g | |
| Initial grease fill, 40% | 450 g |
