SNL 3080 + 23080 CCK/W33 + OH 3080 H
Housing-bearing combination with accessoriesThe combination of SKF housings, bearings and accessories is an excellent choice for a customized, reliable and sustainable solution for your shaft arrangement. SKF has a wide range of high-quality housing designs and sizes to meet your specific challenge – including specially designed housings for special applications. The bearings reflect SKF’s state-of-the-art technology, providing the highest-quality bearings. You need to buy each part in the combination separately.
- Many variants
- Customized combinations
- Cost-efficient
- Reliable
- Sustainable
Description
Associated products
| Housing | SNL 3080 |
| Labyrinth seal | 2 x TS 80 |
| Taconite seal | 2 x TK 80 |
| End cover | ETS 80 |
| Bearing | 23080 CCK/W33 |
| Adapter sleeve | OH 3080 H |
| Locating ring | FRB 22/600 |
Dimensions
| da | 380 mm | Shaft diameter |
|---|---|---|
| d2 | 527 mm | Diameter of taconite seal |
| Ca | 192 mm | Width of bearing seat |
| Da | 600 mm | Diameter of bearing seat |
| A | 400 mm | Width |
| A1 | 360 mm | Foot width |
| ATS | 410 mm | Width across labyrinth seals |
| ATK | 528 mm | Width across taconite seals |
| H | 695 mm | Height |
| H1 | 350 mm | Centre height of bearing seat |
| H2 | 120 mm | Foot height |
| J | 840 mm | Distance between attachment bolts |
| J1 | 220 mm | Distance between attachment bolts |
| L | 1 000 mm | Length |
| N | 50 mm | Length of attachment bolt hole |
| N1 | 42 mm | Width of attachment bolt hole |
| s | 30 mm | Offset between housing and bearing centre line |
| ba | min. 145 mm | Distance bearing centre line to shaft end |
|---|---|---|
| ba | max. 203 mm | Distance bearing centre line to shaft end |
| bb | 140 mm | Distance bearing centre line to side face of lock nut |
| bc | 208.5 mm | Distance bearing centre line to end cover |
| J6 | 920 mm | Distance between dowel pins |
|---|---|---|
| N4 | max. 30 mm | Diameter of dowel pins |
Breaking loads, housing
| P0° | 6 000 kN | Breaking load |
|---|---|---|
| P55° | 7 700 kN | Breaking load |
| P90° | 3 600 kN | Breaking load |
| P120° | 2 700 kN | Breaking load |
| P150° | 2 400 kN | Breaking load |
| P180° | 3 000 kN | Breaking load |
Yield point, cap bolts
| Q120° | 4 200 kN | Load carrying ability of cap bolts |
|---|---|---|
| Q150° | 2 400 kN | Load carrying ability of cap bolts |
| Q180° | 2 100 kN | Load carrying ability of cap bolts |
Mass
| Mass housing | 454 kg |
Mounting information
| Size of cap bolt | M 36×240 | |
| Recommended tightening torque for cap bolts | 600 N·m | |
| Recommended diameter for attachment bolts | G | 36 mm |
| Recommended tightening torque for attachment bolts | 2 280 N·m | |
| Size of eye bolt | M 36 | |
| Initial grease fill, 20% | 6.7 kg | |
| Initial grease fill, 40% | 11.5 kg |
