P2BC 25M-CPSS-DFH
Pillow block bearing unit with composite or cast metal housingPillow (plummer) block bearing units consisting of an insert bearing mounted in a composite or cast metal housing that can be bolted to a support surface. In addition to being part of a unit, some pillow block housings for insert bearings are available as separate components. The SKF assortment includes units that are compliant with several industrial standards and meet many requirements.
- Ready to mount
- Lubricated and sealed bearings
- Quick locking on the shaft
- Large variety of housing shapes, housing materials, and locking methods
- Concentric locking options for high speeds and low vibration
Description
Dimensions
| Shaft diameter | 25 mm |
| Centre height (pillow block) | 36.5 mm |
| Housing overall width | 36 mm |
| Centre distance between bolt holes | 105 mm |
| Bearing width, total | 27.3 mm |
Performance
| Basic dynamic load rating | 11.9 kN |
| Basic static load rating | 7.8 kN |
| Limiting speed | 700 r/min |
Properties
| Housing type | Pillow block |
| Number of bolt holes for fasteners | 2 |
| Fastening bolt hole type | Plain |
| Retaining feature, inner ring | Set screws |
| Bore type | Cylindrical |
| Rubber seating ring | Without |
| Material, housing | Composite for the SKF Food Line |
| Material, bearing | Stainless steel |
| Coating | Without |
| Sealing, bearing | Seal on both sides and flinger on one side |
| Sealing type | Contact, gutter |
| Sealing, unit | End cover and back seal |
| Lubricant | Grease |
| Relubrication hole | Without |
| Grease fitting | Without |
