P2BA 303-SRB-CLE
Roller bearing unitPillow (plummer) block roller bearing units and take-up roller bearing units consist of a spherical or tapered roller bearing mounted in a non-split housing that can be bolted to a support surface. The units are sealed and lubricated and ready to use. This assortment of units covers a wide range of requirements, in metric and inch dimensions.
- Ready to mount
- Factory lubricated and sealed
- Quick locking on the shaft
- Long service life
- Easy to replace
Description
| Metric/inch series | Inch |
| Bearing insert | Spherical roller bearing |
| Bearing position | Non-locating |
| Locking method | SKF ConCentra |
| Bearing housing seal type | Labyrinth seal |
Dimensions
| da | 80.963 mm | Shaft diameter |
|---|---|---|
| d2 | 119.99 mm | Collar outer diameter |
| A | 111.125 mm | Housing foot width |
| A5 | 142.875 mm | Width including end cover |
| B | 86.36 mm | Inner ring width |
| H | 114.3 mm | Height base to center |
| H1 | 44.45 mm | Housing foot height |
| H2 | 217.488 mm | Housing height |
| J | min. 295.275 mm | Distance between attachment bolts, max. |
| J | max. 333.375 mm | Distance between attachment bolts, min. |
| J | 314.325 mm | Distance of attachment bolts |
| L | 387.35 mm | Housing length |
| N | 25.4 mm | Width foot slot width |
| N1 | 44.45 mm | Length of attachment bolt hole |
| s | 43.18 mm | Centre line unit to side face of inner ring |
| S | 5.08 mm | Centre line of “fixed” bearing |
| GN | 1/4-18 NPT | Thread of grease fitting |
|---|
Calculation data
| Basic dynamic load rating | C | 325 kN |
|---|---|---|
| Basic static load rating | C0 | 375 kN |
| Fatigue load limit | Pu | 39 kN |
| Limiting speed | 3 800 r/min | |
| Limiting value | e | 0.24 |
| Calculation factor | Y1 | 2.8 |
| Calculation factor | Y2 | 4.2 |
| Calculation factor | Y0 | 2.8 |
| Bearing mean diameter | dm | 124.968 mm |
| Axial holding force of the locking mechanism | Pa | 34.9 kN |
Mass
| Mass bearing unit | 23.2 kg |
Mounting information
| Attachment bolt diameter | G | 0.875 in |
|---|---|---|
| Set screws | M6-1 x 16mm | |
| Number of set screws | 7 | |
| Tightening torque for set screws | 7.909 N·m | |
| Grease quantity for relubrication | 13 g |
Associated products
| End cover | ECM 218 |
