NJ 1018 ML
Single row cylindrical roller bearing, NJ designSingle row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and one on the inner ring, NJ design bearings can accommodate axial displacement in one direction. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged.
- High radial load carrying capacity
- Low friction
- Long service life
- Locate the shaft axially in one direction
- Separable design
Description
| SKF performance class | SKF Explorer |
Dimensions
| d | 90 mm | Bore diameter |
|---|---|---|
| D | 140 mm | Outside diameter |
| B | 24 mm | Width |
| d1 | ≈ 108 mm | Shoulder diameter of inner ring |
| D1 | ≈ 122.1 mm | Shoulder diameter of outer ring |
| F | 103 mm | Raceway diameter of inner ring |
| r1,2 | min. 1.5 mm | Chamfer dimension |
| r3,4 | min. 1.1 mm | Chamfer dimension |
| s | max. 3.5 mm | Permissible axial displacement |
Abutment dimensions
| da | min. 96 mm | Diameter of spacer sleeve |
|---|---|---|
| da | max. 101 mm | Diameter of spacer sleeve |
| db | min. 111 mm | Diameter of shaft abutment |
| Da | max. 133 mm | Diameter of housing abutment |
| ra | max. 1.5 mm | Radius of fillet |
Calculation data
| Basic dynamic load rating | C | 93 kN |
|---|---|---|
| Basic static load rating | C0 | 104 kN |
| Fatigue load limit | Pu | 12.7 kN |
| Reference speed | 5 600 r/min | |
| Limiting speed | 8 500 r/min | |
| Minimum load factor | kr | 0.15 |
| Limiting value | e | 0.2 |
| Calculation factor | Y | 0.6 |
Mass
| Mass | 1.39 kg |
Tolerances and clearances
Bearing interfaces
