GE 10 E
Radial spherical plain bearing, requiring maintenance, metric sizesRadial spherical plain bearings are designed to accommodate radial and combined radial and axial loads, and also misalignment. This specific design includes a steel/steel sliding contact surface combination. The bearings require maintenance and can be relubricated only from the side.
- Designed for radial and combined radial and axial loads
- Suitable for heavy static, alternating or impact loads
Description
| Maintenance | Relubrication required |
| Sliding contact surface combination | Steel/steel, standard |
| Material, inner ring | Bearing steel |
| Material, outer ring | Bearing steel |
| Sealing | Without |
Dimensions
| d | 10 mm | Bore diameter |
|---|---|---|
| D | 19 mm | Outside diameter |
| B | 9 mm | Width |
| C | 6 mm | Width outer ring |
| α | 12 ° | Angle of tilt |
| dk | 16 mm | Raceway diameter inner ring |
| r1 | min. 0.3 mm | Chamfer dimension bore |
| r2 | min. 0.3 mm | Chamfer dimension outer ring |
Abutment dimensions
| da | min. 11.7 mm | Abutment diameter shaft |
|---|---|---|
| da | max. 13.2 mm | Abutment diameter shaft |
| Da | min. 15.2 mm | Abutment diameter housing |
| Da | max. 17.5 mm | Abutment diameter housing |
| ra | max. 0.3 mm | Fillet radius shaft |
| rb | max. 0.3 mm | Fillet radius housing |
Calculation data
| Basic dynamic load rating | C | 8.15 kN |
|---|---|---|
| Basic static load rating | C0 | 40.5 kN |
| Specific dynamic load factor | K | 100 N/mm² |
| Specific static load factor | K0 | 500 N/mm² |
| Material constant | KM | 330 |
Mass
| Mass plain bearing | 0.012 kg |
