D/W R4 R
Deep groove ball bearingSingle row deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They can accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
- Simple, versatile and robust design
- Low friction
- High-speed capability
- Accommodate radial and axial loads in both directions
- Require little maintenance
Description
Dimensions
| d | 6.35 mm | Bore diameter |
|---|---|---|
| D | 15.875 mm | Outside diameter |
| B | 4.978 mm | Width |
| d2 | ≈ 8.4 mm | Recess diameter |
| D2 | ≈ 13.8 mm | Recess diameter |
| D3 | 17.526 mm | Flange diameter |
| C | 1.067 mm | Flange width |
| r1,2 | min. 0.3 mm | Chamfer dimension |
Abutment dimensions
| da | min. 8 mm | Diameter of shaft abutment |
|---|---|---|
| ra | max. 0.3 mm | Radius of shaft or housing fillet |
Calculation data
| Basic dynamic load rating | C | 0.852 kN |
|---|---|---|
| Basic static load rating | C0 | 0.315 kN |
| Fatigue load limit | Pu | 0.014 kN |
| Reference speed | 95 000 r/min | |
| Limiting speed | 60 000 r/min | |
| Minimum load factor | kr | 0.02 |
| Calculation factor | f0 | 7.1 |
Mass
| Mass bearing | 0.0042 kg |
Tolerance class
| Dimensional tolerances | Normal |
| Radial run-out | Normal |
Tolerances and clearances
Bearing data
Bearing interfaces
