D/W R10
Stainless steel deep groove ball bearingStainless steel single row deep groove ball bearings provide greater chemical and corrosion resistance. As with deep groove ball bearings generally, they are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
- Greater chemical and corrosion resistance
- Simple, versatile and robust design
- Low friction and high-speed capability
- Accommodate radial and axial loads in both directions
- Require little maintenance
Description
Dimensions
| d | 15.875 mm | Bore diameter |
|---|---|---|
| D | 34.925 mm | Outside diameter |
| B | 7.142 mm | Width |
| d1 | ≈ 23.5 mm | Shoulder diameter |
| D1 | ≈ 30.1 mm | Shoulder diameter |
| r1,2 | min. 0.8 mm | Chamfer dimension |
Abutment dimensions
| da | min. 20.5 mm | Diameter of shaft abutment |
|---|---|---|
| Da | max. 30.5 mm | Diameter of housing abutment |
| ra | max. 0.8 mm | Radius of shaft or housing fillet |
Calculation data
| Basic dynamic load rating | C | 4.94 kN |
|---|---|---|
| Basic static load rating | C0 | 3.15 kN |
| Fatigue load limit | Pu | 0.137 kN |
| Reference speed | 40 000 r/min | |
| Limiting speed | 26 000 r/min | |
| Minimum load factor | kr | 0.025 |
| Calculation factor | f0 | 14.1 |
Mass
| Mass bearing | 0.029 kg |
Tolerance class
| Dimensional tolerances | Normal |
| Radial run-out | Normal |
Tolerances and clearances
Bearing data
Bearing interfaces
