D/W R1
Stainless steel deep groove ball bearingStainless steel single row deep groove ball bearings provide greater chemical and corrosion resistance. As with deep groove ball bearings generally, they are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
- Greater chemical and corrosion resistance
- Simple, versatile and robust design
- Low friction and high-speed capability
- Accommodate radial and axial loads in both directions
- Require little maintenance
Description
Dimensions
| d | 1.397 mm | Bore diameter |
|---|---|---|
| D | 4.762 mm | Outside diameter |
| B | 1.984 mm | Width |
| d1 | ≈ 2.33 mm | Shoulder diameter |
| D1 | ≈ 3.8 mm | Shoulder diameter |
| r1,2 | min. 0.1 mm | Chamfer dimension |
Abutment dimensions
| da | min. 2 mm | Diameter of shaft abutment |
|---|---|---|
| Da | max. 3.9 mm | Diameter of housing abutment |
| ra | max. 0.1 mm | Radius of shaft or housing fillet |
Calculation data
| Basic dynamic load rating | C | 0.133 kN |
|---|---|---|
| Basic static load rating | C0 | 0.034 kN |
| Fatigue load limit | Pu | 0.001 kN |
| Reference speed | 200 000 r/min | |
| Limiting speed | 130 000 r/min | |
| Minimum load factor | kr | 0.03 |
| Calculation factor | f0 | 5.7 |
Mass
| Mass bearing | 0.0002 kg |
Tolerance class
| Dimensional tolerances | Normal |
| Radial run-out | Normal |
Tolerances and clearances
Bearing data
Bearing interfaces
