D/W R1 R-2Z
Stainless steel deep groove ball bearing with flanged outer ring and integral sealingStainless steel single row deep groove ball bearings with flanged outer ring and seals or shields on both sides provide greater chemical and corrosion resistance. As with deep groove ball bearings generally, they are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types. The flanged outer ring facilitates axial location of the bearings within their housings. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.
- Greater chemical and corrosion resistance
- Flanged outer ring facilitates axial location of the bearings within their housings
- Integral sealing prolongs bearing service life
- Typical benefits of single row deep groove ball bearings
Description
Dimensions
| d | 1.397 mm | Bore diameter |
|---|---|---|
| D | 4.762 mm | Outside diameter |
| B | 2.779 mm | Width |
| d1 | ≈ 2.33 mm | Shoulder diameter |
| D2 | ≈ 4.25 mm | Recess diameter |
| D3 | 5.944 mm | Flange diameter |
| C | 0.787 mm | Flange width |
| r1,2 | min. 0.1 mm | Chamfer dimension |
Abutment dimensions
| da | min. 2 mm | Diameter of shaft abutment |
|---|---|---|
| da | max. 2.2 mm | Diameter of shaft abutment |
| ra | max. 0.1 mm | Radius of shaft or housing fillet |
Calculation data
| Basic dynamic load rating | C | 0.133 kN |
|---|---|---|
| Basic static load rating | C0 | 0.034 kN |
| Fatigue load limit | Pu | 0.001 kN |
| Reference speed | 200 000 r/min | |
| Limiting speed | 100 000 r/min | |
| Minimum load factor | kr | 0.03 |
| Calculation factor | f0 | 5.7 |
Mass
| Mass bearing | 0.000305 kg |
Tolerance class
| Dimensional tolerances | Normal |
| Radial run-out | Normal |
Tolerances and clearances
Bearing data
Bearing interfaces
