AH 3040 G
Withdrawal sleeve, basic design, ISO standardsWithdrawal sleeves are slit tapered sleeves that are used to mount bearings with a tapered bore onto the cylindrical seat of stepped shafts. This AH(X) sleeve has dimensions in accordance with ISO standards and is a basic design for mounting and dismounting. The sleeve is located on the shaft by a lock nut or an end plate. The lock nuts and appropriate locking device can be ordered separately. End plates are not manufactured by SKF.
- Cost effective
- Quick and easy mounting
Description
Dimensions
| d1 | 190 mm | Bore diameter |
|---|---|---|
| d | 200 mm | Outside diameter small taper |
| B1 | 102 mm | Width |
| B2 | 108 mm | Width sleeve and bearing before sleeve is driven into bore |
| G | Tr 210×4 | Thread |
| G1 | 19 mm | Length thread |
1:12 | External taper |
Mass
| Mass withdrawal sleeve | 3.69 kg |
Associated products
| Hydraulic nut | HMV 42E |
| Nut for removal | HM 42 T |
