7008-B-XL-2RS-TVP-UL
Angular contact ball bearing
Angular contact ball bearing 70..-B-XL-2RS-TVP, single row, X-life, seals, plastic cage
Replaces
7008-B-2RS-TVP-UL
Description
Metric
Imperial
Main Dimensions & Performance Data
| d | 40 mm | Bore diameter |
| D | 68 mm | Outside diameter |
| B | 15 mm | Width |
| Cr | 28,000 N | Basic dynamic load rating, radial |
| C0r | 20,300 N | Basic static load rating, radial |
| Cur | 1,410 N | Fatigue load limit, radial |
| nG | 5,400 1/min | Limiting speed |
| ≈m | 170 g | Weight |
Mounting dimensions
| da min | 44.6 mm | Minimum diameter of shaft shoulder |
| Da max | 63.4 mm | Maximum diameter of housing shoulder |
| Db max | 64.8 mm | Maximum diameter of housing shoulder |
| ra max | 1 mm | Maximum fillet radius of shaft |
| ra1 max | 0.6 mm | Maximum fillet radius of housing |
Dimensions
| rmin | 1 mm | Minimum chamfer dimension |
| r1 min | 0.6 mm | Minimum chamfer dimension |
| D1 | 58.8 mm | Shoulder diameter on outer ring wide side face |
| D2 | 59.4 mm | Caliber diameter on outer ring wide side face |
| D3 | 65 mm | Caliber diameter on outer ring small side face |
| d1 | 51.9 mm | Shoulder diameter on inner ring wide side face |
| d2 | 48.3 mm | Caliber diameter on inner ring wide side face |
| a | 30 mm | Distance between the apexes of the pressure cones |
| α | 40 ° | Contact angle |
Temperature range
| Tmin | -20 °C | Operating temperature min. |
| Tmax | 100 °C | Operating temperature max. |
Additional information
| Vmax | -6 µm | Preload per set max. |
| Tol(+) | 8 µm | Tolerance for axial clearance or preload per set |
| FV max | 200 N | Preload force |
Your current product variant
| Design variant | B | Design variant B |
| Sealing | 2RS | Contact seal on both sides |
| Cage | TVP | solid cage made of glass-fiber reinforced polyamid PA66 |
| Tolerance class | PN | Normal (PN) |
| Bearing with matched conditions for fitting in pairs | UL | bearing set with light preload |
| Lubricant | GA13 | Ball bearing and insert bearing grease, standard for D>62mm |
| Dimensional / heat stabilization | S0 | Rings dimensional stabilized up to 150° |
Characteristics
