24160 CCK30/W33
Spherical roller bearing with tapered bore and relubrication featuresSpherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts.
- Accommodate misalignment
- High load carrying capacity
- Relubrication features
- Low friction and long service life
- Increased wear resistance
Description
| SKF performance class | SKF Explorer |
| Bore type | Tapered 1:30 |
Dimensions
| d | 300 mm | Bore diameter |
|---|---|---|
| D | 500 mm | Outside diameter |
| B | 200 mm | Width |
| d2 | ≈ 338 mm | Shoulder diameter of inner ring |
| D1 | ≈ 422 mm | Shoulder/recess diameter of outer ring |
| b | 13.9 mm | Width of lubrication groove |
| K | 7.5 mm | Diameter of lubrication hole |
| r1,2 | min. 5 mm | Chamfer dimension |
Abutment dimensions
| Da | max. 480 mm | Diameter of housing abutment |
|---|---|---|
| ra | max. 4 mm | Radius of fillet |
Calculation data
| Basic dynamic load rating | C | 3 876 kN |
|---|---|---|
| Basic static load rating | C0 | 6 300 kN |
| Fatigue load limit | Pu | 465 kN |
| Reference speed | 560 r/min | |
| Limiting speed | 800 r/min | |
| Limiting value | e | 0.4 |
| Calculation factor | Y1 | 1.7 |
| Calculation factor | Y2 | 2.5 |
| Calculation factor | Y0 | 1.6 |
Mass
| Mass | 155 kg |
Tolerance class
| Dimensional tolerances | Normal |
| Radial run-out | P5 |
Tolerances and clearances
Bearing interfaces
