24120-2RS5W/C3GEM9
Spherical roller bearing with integral sealingSpherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. Under normal operating conditions, sealed bearings are almost maintenance-free, keeping service costs and grease consumption low.
- Accommodate misalignment
- High load carrying capacity
- Sealed for increased reliability
- Low friction and long service life
- Increased wear resistance
Description
| SKF performance class | SKF Explorer |
| Bore type | Cylindrical |
Dimensions
| d | 100 mm | Bore diameter |
|---|---|---|
| D | 165 mm | Outside diameter |
| B | 65 mm | Width |
| d2 | ≈ 110 mm | Shoulder diameter of inner ring |
| D1 | ≈ 147 mm | Shoulder/recess diameter of outer ring |
| r1,2 | min. 2 mm | Chamfer dimension |
Abutment dimensions
| da | min. 109.8 mm | Diameter of shaft abutment |
|---|---|---|
| da | max. 110 mm | Diameter of shaft abutment |
| Da | max. 154 mm | Diameter of housing abutment |
| ra | max. 2 mm | Radius of fillet |
Calculation data
| Basic dynamic load rating | C | 470 kN |
|---|---|---|
| Basic static load rating | C0 | 640 kN |
| Fatigue load limit | Pu | 68 kN |
| Limiting speed | 225 r/min | |
| Limiting value | e | 0.35 |
| Calculation factor | Y1 | 1.9 |
| Calculation factor | Y2 | 2.9 |
| Calculation factor | Y0 | 1.8 |
Mass
| Mass | 5.65 kg |
Tolerance class
| Dimensional tolerances | Normal |
| Radial run-out | P5 |
Tolerances and clearances
Bearing interfaces
