24052 CCK30/W33
Spherical roller bearing with tapered bore and relubrication featuresSpherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts.
- Accommodate misalignment
- High load carrying capacity
- Relubrication features
- Low friction and long service life
- Increased wear resistance
Description
| SKF performance class | SKF Explorer |
| Bore type | Tapered 1:30 |
Dimensions
| d | 260 mm | Bore diameter |
|---|---|---|
| D | 400 mm | Outside diameter |
| B | 140 mm | Width |
| d2 | ≈ 289 mm | Shoulder diameter of inner ring |
| D1 | ≈ 347 mm | Shoulder/recess diameter of outer ring |
| b | 11.1 mm | Width of lubrication groove |
| K | 6 mm | Diameter of lubrication hole |
| r1,2 | min. 4 mm | Chamfer dimension |
Abutment dimensions
| Da | max. 385 mm | Diameter of housing abutment |
|---|---|---|
| ra | max. 3 mm | Radius of fillet |
Calculation data
| Basic dynamic load rating | C | 2 135 kN |
|---|---|---|
| Basic static load rating | C0 | 3 450 kN |
| Fatigue load limit | Pu | 285 kN |
| Reference speed | 1 000 r/min | |
| Limiting speed | 1 400 r/min | |
| Limiting value | e | 0.33 |
| Calculation factor | Y1 | 2 |
| Calculation factor | Y2 | 3 |
| Calculation factor | Y0 | 2 |
Mass
| Mass | 62.5 kg |
Tolerance class
| Dimensional tolerances | Normal |
| Radial run-out | P5 |
Tolerances and clearances
Bearing interfaces
