GE 17 TXGR
Radial spherical plain bearing, maintenance-free, metric sizesRadial spherical plain bearings are designed to accommodate radial and combined radial and axial loads, and also misalignment. This specific design includes a steel/PTFE fabric sliding contact surface combination and the bearings are maintenance-free. Except for those with designation suffix TXGR, they have a double-lip contact seal (-2RS) or a triple-lip, heavy duty contact seal (-2LS) on both sides. Those with designation suffixes TXGR, TXG3E or TXG3A are made of stainless steel.
- Designed for radial and combined radial and axial loads
- Long service life and maintenance-free
- Suitable for very heavy, constant direction loads
- Low coefficient of friction
Description
| Maintenance | Maintenance-free |
| Sliding contact surface combination | Steel/PTFE fabric |
| Material, inner ring | Stainless steel |
| Material, outer ring | Stainless steel |
| Sealing | Without |
Dimensions
| d | 17 mm | Bore diameter |
|---|---|---|
| D | 30 mm | Outside diameter |
| B | 14 mm | Width |
| C | 10 mm | Width outer ring |
| α | 10 ° | Angle of tilt |
| dk | 25 mm | Raceway diameter inner ring |
| r1 | min. 0.3 mm | Chamfer dimension bore |
| r2 | min. 0.3 mm | Chamfer dimension outer ring |
Abutment dimensions
| da | min. 19 mm | Abutment diameter shaft |
|---|---|---|
| da | max. 20.7 mm | Abutment diameter shaft |
| Da | min. 23.7 mm | Abutment diameter housing |
| Da | max. 28.3 mm | Abutment diameter housing |
| ra | max. 0.3 mm | Fillet radius shaft |
| rb | max. 0.3 mm | Fillet radius housing |
Calculation data
| Basic dynamic load rating | C | 60 kN |
|---|---|---|
| Basic static load rating | C0 | 100 kN |
| Specific dynamic load factor | K | 300 N/mm² |
| Specific static load factor | K0 | 500 N/mm² |
Mass
| Mass plain bearing | 0.05 kg |
