SONL 226-526 + C 2226 K + H 3126 L
The combination of housings, bearings and accessories is an excellent choice for a customized, reliable and sustainable solution for your shaft arrangement. Has a wide range of high-quality housing designs and sizes to meet your specific challenge – including specially designed housings for special applications.
- Many variants
- Customized combinations
- Cost-efficient
- Reliable
- Sustainable
Description
Associated products
| Housing | SONL 226-526 |
| Seal kit for a through shaft | TSO 526 |
| Seal kit for a shaft end | TSO 526 A |
| End cover | ECO 226-526 |
| Bearing | 22226 EK |
| Adapter sleeve | H 3126 |
| Locating ring | 2 x FRB 11/230 |
Dimensions
| da | 115 mm | Shaft diameter |
|---|---|---|
| Ca | 86 mm | Width of bearing seat |
| Da | 230 mm | Diameter of bearing seat |
| A | 255 mm | Width |
| A1 | 180 mm | Foot width |
| A2 | 184 mm | Distance housing centreline to oil level gauge side face |
| AA | 263 mm | Width for shaft end arrangement |
| AB | 270 mm | Width for through shaft arrangement |
| d1 | 145 mm | Outside diameter of seal |
| B1 | 103 mm | Width of seal |
| H | 335 mm | Height |
| H0 | 406 mm | Height including eye bolt |
| H1 | 180 mm | Centre height of bearing seat |
| H2 | 60 mm | Foot height |
| J | 377 mm | Distance between attachment bolts |
| J1 | 100 mm | Distance between attachment bolts |
| L | 450 mm | Length |
| N | 35 mm | Length of attachment bolt hole |
| N1 | 28 mm | Width of attachment bolt hole |
| S | 135 mm | Distance bearing centreline to seal end face |
| ba | 60 mm | Distance bearing centre line to shaft end |
|---|---|---|
| bb | 195 mm | Distance shaft end to seal side face |
| s2 | 43 mm | Distance shaft end to end cover |
| J6 | 390 mm | Distance between dowel pins |
|---|---|---|
| N4 | max.8 mm | Diameter of dowel pins |
| PG | G 3/8 | Size of tapped oil inlet hole in housing cap |
|---|---|---|
| P1 | 60 mm | Distance housing centre line to oil inlet, housing cap |
| P2 | 69 mm | Distance housing centre line to oil inlet, housing cap |
| RG | G 3/4 | Size of tapped oil outlet hole in housing base |
| R1 | 192 mm | Distance between oil outlets in housing base |
| R2 | 25 mm | Height of oil outlet position |
| O1 | 120 mm | Height housing bottom to oil level gauge top |
| O2 | 184 mm | Distance housing centre line to oil level gauge end |
Breaking loads, housing
| P55° | 2 550 kN | Breaking load |
|---|---|---|
| P90° | 980 kN | Breaking load |
| P120° | 700 kN | Breaking load |
| P150° | 650 kN | Breaking load |
| P180° | 850 kN | Breaking load |
| Pa | 340 kN | Breaking load |
Yield point, cap bolts
| Q120° | 800 kN | Load carrying ability of cap bolts |
|---|---|---|
| Q150° | 460 kN | Load carrying ability of cap bolts |
| Q180° | 400 kN | Load carrying ability of cap bolts |
Mass
| Mass housing | 72 kg |
Mounting information
| Size of cap bolt | M 16×120 | |
| Recommended tightening torque for cap bolts | 150 N·m | |
| Recommended diameter for attachment bolts | G | 24 mm |
| Recommended tightening torque for attachment bolts | 665 N·m | |
| Size of eye bolt | M 16 | |
| Oil level | min.63 mm | |
| Oil fill | min.0.9 l | |
| Oil level | max.85 mm | |
| Oil fill | max.1.4 l |
