SNLN 3052 + 23052-2CS5K/VT143 + OH3052HE
The combination of housings, bearings and accessories is an excellent choice for a customized, reliable and sustainable solution for your shaft arrangement. Has a wide range of high-quality housing designs and sizes to meet your specific challenge – including specially designed housings for special applications.
- Many variants
- Customized combinations
- Cost-efficient
- Reliable
- Sustainable
Description
Associated products
| Housing | SNLN 3052 |
| Bearing | 23052 CCK/W33 |
| Adapter sleeve | OH 3052 H |
| Locating ring | 2 x FRB 10/400 |
Dimensions
| da | 240 mm | Shaft diameter |
|---|---|---|
| Ca | 124 mm | Width of bearing seat |
| Da | 400 mm | Diameter of bearing seat |
| A | 290 mm | Width |
| A1 | 220 mm | Foot width |
| H | 475 mm | Height |
| H1 | 240 mm | Centre height of bearing seat |
| H2 | 80 mm | Foot height |
| J | 680 mm | Distance between attachment bolts |
| L | 820 mm | Length |
| N | 70 mm | Length of attachment bolt hole |
| N1 | 48 mm | Width of attachment bolt hole |
| ba | 101 mm | Distance bearing centre line to shaft end |
|---|---|---|
| bc | 120 mm | Distance bearing centre line to end cover |
| J6 | 760 mm | Distance between dowel pins |
|---|---|---|
| J7 | 80 mm | Axial offset of dowel pins |
| N4 | max.16 mm | Diameter of dowel pins |
| A2L | 312 mm | Width across labyrinth seals |
|---|---|---|
| A2T | 390 mm | Width across taconite seals |
| d2 | 378 mm | Diameter of seal |
Breaking loads, housing
| P55° | 2 120 kN | Breaking load |
|---|---|---|
| P90° | 1 270 kN | Breaking load |
| P120° | 950 kN | Breaking load |
| P150° | 850 kN | Breaking load |
| P180° | 1 060 kN | Breaking load |
| Pa | 370 kN | Breaking load |
Yield point, cap bolts
| Q120° | 2 100 kN | Load carrying ability of cap bolts |
|---|---|---|
| Q150° | 1 200 kN | Load carrying ability of cap bolts |
| Q180° | 1 050 kN | Load carrying ability of cap bolts |
Mass
| Mass housing | 162kg |
Mounting information
| Size of cap bolt | M 36 x 200 | |
| Recommended tightening torque for cap bolts | 600 N·m | |
| Recommended diameter for attachment bolts | G | 42 mm |
| Recommended tightening torque for attachment bolts | 3 640 N·m | |
| Size of eye bolt | M12 | |
| Initial grease fill, 20% | 2 100 g | |
| Initial grease fill, 40% | 3 800 g |
