SNL 3052 + C 3052 K + OH 3052/9.7/16 H
Housing-bearing combination with accessoriesThe combination of SKF housings, bearings and accessories is an excellent choice for a customized, reliable and sustainable solution for your shaft arrangement. SKF has a wide range of high-quality housing designs and sizes to meet your specific challenge – including specially designed housings for special applications. The bearings reflect SKF’s state-of-the-art technology, providing the highest-quality bearings. You need to buy each part in the combination separately.
- Many variants
- Customized combinations
- Cost-efficient
- Reliable
- Sustainable
Description
Associated products
| Housing | SNL 3052 |
| Labyrinth seal | 2 x TS 52/9.7/16 |
| End cover | ETS 52 |
| Bearing | C 3052 K |
| Adapter sleeve | OH 3052/9.7/16 H |
| Locating ring | 2 x FRB 22/440 |
Dimensions
| da | 239.713 mm | Shaft diameter |
|---|---|---|
| Ca | 148 mm | Width of bearing seat |
| Da | 400 mm | Diameter of bearing seat |
| A | 310 mm | Width |
| A1 | 260 mm | Foot width |
| ATS | 315 mm | Width across labyrinth seals |
| H | 474 mm | Height |
| H1 | 240 mm | Centre height of bearing seat |
| H2 | 95 mm | Foot height |
| J | 600 mm | Distance between attachment bolts |
| J1 | 150 mm | Distance between attachment bolts |
| L | 700 mm | Length |
| N | 42 mm | Length of attachment bolt hole |
| N1 | 35 mm | Width of attachment bolt hole |
| s | 12 mm | Offset between housing and bearing centre line |
| ba | min. 103 mm | Distance bearing centre line to shaft end |
|---|---|---|
| ba | max. 136 mm | Distance bearing centre line to shaft end |
| bb | 98 mm | Distance bearing centre line to side face of lock nut |
| bc | 141.5 mm | Distance bearing centre line to end cover |
| J6 | 650 mm | Distance between dowel pins |
|---|---|---|
| N4 | max. 20 mm | Diameter of dowel pins |
Breaking loads, housing
| P0° | 3 400 kN | Breaking load |
|---|---|---|
| P55° | 4 200 kN | Breaking load |
| P90° | 2 000 kN | Breaking load |
| P120° | 1 500 kN | Breaking load |
| P150° | 1 400 kN | Breaking load |
| P180° | 1 700 kN | Breaking load |
| Pa | 1 100 kN | Breaking load |
Yield point, cap bolts
| Q120° | 2 860 kN | Load carrying ability of cap bolts |
|---|---|---|
| Q150° | 1 650 kN | Load carrying ability of cap bolts |
| Q180° | 1 430 kN | Load carrying ability of cap bolts |
Mass
| Mass housing | 187 kg |
Mounting information
| Size of cap bolt | M 30×180 | |
| Recommended tightening torque for cap bolts | 400 N·m | |
| Recommended diameter for attachment bolts | G | 30 mm |
| Recommended tightening torque for attachment bolts | 1 310 N·m | |
| Size of eye bolt | M 24 | |
| Initial grease fill, 20% | 2.3 kg | |
| Initial grease fill, 40% | 3.9 kg |
