SNL 3140 + 22238 CCK/W33 + HA 3138
Housing-bearing combination with accessoriesThe combination of SKF housings, bearings and accessories is an excellent choice for a customized, reliable and sustainable solution for your shaft arrangement. SKF has a wide range of high-quality housing designs and sizes to meet your specific challenge – including specially designed housings for special applications. The bearings reflect SKF’s state-of-the-art technology, providing the highest-quality bearings. You need to buy each part in the combination separately.
- Many variants
- Customized combinations
- Cost-efficient
- Reliable
- Sustainable
Description
Associated products
| Housing | SNL 3140 |
| Labyrinth seal | 2 x TS 40/6.15/16 |
| End cover | ETS 40 |
| Bearing | 22238 CCK/W33 |
| Adapter sleeve | HA 3138 |
| Locating ring | 4 x FRB 10/340 |
Dimensions
| da | 176.213 mm | Shaft diameter |
|---|---|---|
| Ca | 132 mm | Width of bearing seat |
| Da | 340 mm | Diameter of bearing seat |
| A | 280 mm | Width |
| A1 | 230 mm | Foot width |
| ATS | 290 mm | Width across labyrinth seals |
| H | 411 mm | Height |
| H1 | 210 mm | Centre height of bearing seat |
| H2 | 85 mm | Foot height |
| J | 510 mm | Distance between attachment bolts |
| J1 | 130 mm | Distance between attachment bolts |
| L | 610 mm | Length |
| N | 42 mm | Length of attachment bolt hole |
| N1 | 35 mm | Width of attachment bolt hole |
| s | 10 mm | Offset between housing and bearing centre line |
| ba | min. 82 mm | Distance bearing centre line to shaft end |
|---|---|---|
| ba | max. 122 mm | Distance bearing centre line to shaft end |
| bb | 76.5 mm | Distance bearing centre line to side face of lock nut |
| bc | 127.5 mm | Distance bearing centre line to end cover |
| J6 | 560 mm | Distance between dowel pins |
|---|---|---|
| N4 | max. 20 mm | Diameter of dowel pins |
Breaking loads, housing
| P0° | 2 600 kN | Breaking load |
|---|---|---|
| P55° | 3 200 kN | Breaking load |
| P90° | 1 600 kN | Breaking load |
| P120° | 1 100 kN | Breaking load |
| P150° | 1 000 kN | Breaking load |
| P180° | 1 300 kN | Breaking load |
| Pa | 840 kN | Breaking load |
Yield point, cap bolts
| Q120° | 1 800 kN | Load carrying ability of cap bolts |
|---|---|---|
| Q150° | 1 040 kN | Load carrying ability of cap bolts |
| Q180° | 900 kN | Load carrying ability of cap bolts |
Mass
| Mass housing | 123 kg |
Mounting information
| Size of cap bolt | M 24×160 | |
| Recommended tightening torque for cap bolts | 350 N·m | |
| Recommended diameter for attachment bolts | G | 30 mm |
| Recommended tightening torque for attachment bolts | 1 310 N·m | |
| Size of eye bolt | M 20 | |
| Initial grease fill, 20% | 1.5 kg | |
| Initial grease fill, 40% | 2.3 kg |
