K 89422 M
Single direction cylindrical roller thrust bearingSingle direction cylindrical roller thrust bearings are designed to accommodate heavy axial loads and peak loads in one direction. They must not be subjected to any radial load. The bearings provide a high degree of stiffness and require little axial space. To accommodate axial loads in both directions, a double direction bearing can be created by combining two cylindrical roller and cage thrust assemblies and two bearing washers with an intermediate washer.
- High axial load carrying capacity
- High stiffness
- Long service life
- Require little axial space
- Separable design
Description
Dimensions
| d | 110 mm | Bore diameter |
|---|---|---|
| D | 230 mm | Outside diameter |
| Dw | 24 mm | Diameter roller |
| Ea | 121 mm | Raceway diameter (min.) roller and cage thrust assembly |
| Eb | 223 mm | Raceway diameter (max.) roller and cage thrust assembly |
Calculation data
| Basic dynamic load rating | C | 800 kN |
|---|---|---|
| Basic static load rating | C0 | 3 350 kN |
| Fatigue load limit | Pu | 310 kN |
| Reference speed | 630 r/min | |
| Limiting speed | 1 300 r/min | |
| Minimum axial load factor | A | 0.898 |
Mass
| Mass roller and cage thrust assembly | 5.11 kg |
Associated products
| Shaft washer | WS 89422 |
| Housing washer | GS 89422 |
Tolerances and clearances
Bearing data, Design considerations
Bearing interfaces
