FYNT 100 L
Square flanged roller bearing unit with SKF ConCentra locking, metric seriesSquare flanged roller bearing units consist of a spherical roller bearing mounted in a cast iron housing that can be bolted to a machine wall. They are robust, ready-to-mount units that are assembled, lubricated and sealed at the factory for maximum service life. The simple installation, easy alignment and reliable locking technology of SKF ConCentra units contribute to a smooth operation.
- Ready to mount
- Factory lubricated and sealed
- Long service life
- Minimal maintenance
Description
| Metric/inch series | Metric |
| Bearing insert | Spherical roller bearing |
| Bearing position | Non-locating |
| Locking method | SKF ConCentra |
| Bearing housing seal type | Radial lip seal |
Dimensions
| da | 100 mm | Shaft diameter |
|---|---|---|
| d2 | 130 mm | Collar outer diameter |
| A | 98 mm | Housing width |
| A1 | 30 mm | Flange thickness |
| A2 | 51.7 mm | Machined face to centre line bearing |
| A3 | 6 mm | Centring bore depth |
| B | 89 mm | Inner ring width |
| Dc | 220 mm | Centring bore diameter |
| J | 219 mm | Distance of attachment bolts |
| L | 270 mm | Housing length |
| N | 22 mm | Bolt hole diameter |
| S | 2.5 mm | Axial displacement |
| T | 98.9 mm | Total width |
| J5 | 122 mm | Distance dowel pins |
|---|---|---|
| J6 | 78 mm | Distance dowel pins |
| N4 | max. 8 mm | Pin hole diameter |
Calculation data
| Basic dynamic load rating | C | 425 kN |
|---|---|---|
| Basic static load rating | C0 | 490 kN |
| Fatigue load limit | Pu | 49 kN |
| Limiting speed | 2 000 r/min | |
| Limiting value | e | 0.24 |
| Calculation factor | Y1 | 2.8 |
| Calculation factor | Y2 | 4.2 |
| Calculation factor | Y0 | 2.8 |
| Bearing mean diameter | dm | 140 mm |
| Axial holding force of the locking mechanism | Pa | 35 kN |
Breaking loads
| P1 | 190 kN | Breaking load |
|---|---|---|
| P2 | 200 kN | Breaking load |
| P3 | 640 kN | Breaking load |
Mass
| Mass bearing unit | 23 kg |
Mounting information
| Attachment bolt diameter | G | 20 mm |
|---|---|---|
| Tightening torque for attachment bolts | 385 N·m | |
| Set screws | M6 | |
| Number of set screws | 7 | |
| Tightening torque for set screws | 8 N·m | |
| Grease quantity for relubrication | 17 g |
