F4BE 308-SRB-SRE-Y
Square flanged roller bearing unit, set screw lockingFour-bolt square flange roller bearing units with Type E dimensions consist of a spherical roller bearing mounted in a cast iron housing that can support rotating shafts through walls, bulkheads or other flat surfaces. The units are shaft-ready, pre-assembled and pre-greased, for installation right out of the box. Locating and non-locating variants can be specified while the standard set screw mounting accommodates rotation in both directions. End covers are optional.
- Ready to mount
- Factory lubricated and sealed
- Long service life
- Minimal maintenance
Description
| Metric/inch series | Inch |
| Bearing insert | Spherical roller bearing |
| Bearing position | Non-locating |
| Locking method | Set screws |
| Bearing housing seal type | Radial lip seal |
Dimensions
| da | 88.9 mm | Shaft diameter |
|---|---|---|
| A | 84.138 mm | Housing width |
| A1 | 28.575 mm | Flange thickness |
| A2 | 42.069 mm | Machined face to centre line bearing |
| A5 | 115.094 mm | Total width incl. end cover |
| B | 102.394 mm | Inner ring width |
| J | 177.8 mm | Bolt distance or pitch diameter |
| L | 222.25 mm | Housing length |
| N | 20.638 mm | Bolt hole diameter |
| s | 36.513 mm | Inner ring centre to end |
| S | 0.794 mm | Centre line of locating support |
| T | 107.95 mm | Total width |
| GN | 1/8-27 NPT | Thread of grease fitting |
|---|
Calculation data
| Basic dynamic load rating | C | 253 kN |
|---|---|---|
| Basic static load rating | C0 | 340 kN |
| Fatigue load limit | Pu | 37.5 kN |
| Limiting speed | 2 300 r/min | |
| Limiting value | e | 0.31 |
| Calculation factor | Y1 | 2.2 |
| Calculation factor | Y2 | 3.3 |
| Calculation factor | Y0 | 2.2 |
| Bearing mean diameter | dm | 124.968 mm |
| Axial holding force of the locking mechanism | Pa | 4 kN |
Mass
| Mass bearing unit | 15.6 kg |
Mounting information
| Attachment bolt diameter | G | 0.75 in |
|---|---|---|
| Set screws | 1/2″-20 UNF-3A x 7/8″ | |
| Number of set screws | 2 | |
| Tightening torque for set screws | 70.051 N·m | |
| Grease quantity for relubrication | 13 g |
Included products
| End cover | B 9694 G |
