F4BE 111-SRB-SGE
Square flanged roller bearing unit, set screw lockingFour-bolt square flange roller bearing units with Type E dimensions consist of a spherical roller bearing mounted in a cast iron housing that can support rotating shafts through walls, bulkheads or other flat surfaces. The units are shaft-ready, pre-assembled and pre-greased, for installation right out of the box. Locating and non-locating variants can be specified while the standard set screw mounting accommodates rotation in both directions. End covers are optional.
- Ready to mount
- Factory lubricated and sealed
- Long service life
- Minimal maintenance
Description
Dimensions
| Shaft diameter | 42.863 mm |
| Housing overall width | 58.738 mm |
| Overall width, total | 76.994 mm |
| Centre distance between bolt holes | 104.775 mm |
| Attachment bolt diameter | 12.7 mm |
| Bearing width, total | 73.025 mm |
Performance
| Basic dynamic load rating | 77 kN |
| Basic static load rating | 88.1 kN |
| Limiting speed | 1 600 r/min |
Properties
| Housing type | Flanged |
| Flanged housing type | Square |
| Number of bolt holes for fasteners | 4 |
| Bearing insert | Spherical roller bearing |
| Retaining feature, inner ring | Set screws |
| Bearing position | Non-locating |
| Bore type | Cylindrical |
| Material, housing | Cast iron |
| Material, bearing | Bearing steel |
| Coating | Without |
| Bearing housing seal type | Heavy-duty seal |
| Sealing, unit | Optional end cover |
| Lubricant | Grease |
| Relubrication hole | With |
| Grease fitting | With |
