F4B 108-SRB-SRE
Flanged roller bearing unit with cast housingFlanged roller bearing units consist of an insert bearing mounted in a cast housing that can be bolted to a machine wall or frame. In addition to being part of a unit, some flanged housings for insert bearings are available as separate components. The SKF assortment includes roller bearing units compliant with several industrial standards, meeting many requirements regarding bolt patterns and mechanisms for locking onto on the shaft.
- Ready to mount
- Factory lubricated and sealed
- Long service life
- Minimal maintenance
- Variety of housing shapes, materials and locking methods
Description
Dimensions
| Shaft diameter | 38.1 mm |
| Housing overall width | 57.15 mm |
| Overall width, total | 76.994 mm |
| Centre distance between bolt holes | 89.713 mm |
| Attachment bolt diameter | 12.7 mm |
| Bearing width, total | 69.85 mm |
Performance
| Basic dynamic load rating | 73.8 kN |
| Basic static load rating | 81.4 kN |
| Limiting speed | 5 100 r/min |
Properties
| Housing type | Flanged |
| Flanged housing type | Square |
| Number of bolt holes for fasteners | 4 |
| Bearing insert | Spherical roller bearing |
| Retaining feature, inner ring | Set screws |
| Bearing position | Non-locating |
| Bore type | Cylindrical |
| Material, housing | Cast iron |
| Material, bearing | Bearing steel |
| Coating | Without |
| Bearing housing seal type | Radial lip seal |
| Sealing, unit | Without |
| Lubricant | Grease |
| Relubrication hole | With |
| Grease fitting | With |
