P2BC 30M-TPSS
Pillow block ball bearing unit with extended inner ring and set screw locking, compositePillow (plummer) block ball bearing units consist of an insert bearing mounted in a composite housing that is lightweight but robust and has excellent corrosion resistance. This variant is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount.
- Designed for a constant and alternating rotation
- Excellent corrosion resistance
- Lightweight
- Recyclable
Description
Dimensions
| Shaft diameter | 30 mm |
| Centre height (pillow block) | 42.9 mm |
| Housing overall width | 40 mm |
| Centre distance between bolt holes | 119 mm |
| Bearing width, total | 38.1 mm |
Performance
| Basic dynamic load rating | 16.3 kN |
| Basic static load rating | 11.2 kN |
| Limiting speed | 3 800 r/min |
| Note | Limiting speed with shaft tolerance h6 |
Properties
| Housing type | Pillow block |
| Number of bolt holes for fasteners | 2 |
| Fastening bolt hole type | Plain |
| Retaining feature, inner ring | Set screws |
| Bore type | Cylindrical |
| Rubber seating ring | Without |
| Material, housing | Composite for the SKF Food Line |
| Material, bearing | Stainless steel |
| Coating | Without |
| Sealing, bearing | Seal and flinger on both sides |
| Sealing type | Contact, gutter |
| Sealing, unit | Optional end cover |
| Lubricant | Grease |
| Relubrication hole | Without |
| Grease fitting | Without |
