P2BSS 012-TPSS
Pillow block ball bearing unit with extended inner ring and set screw locking, stainless steelPillow (plummer) block ball bearing units consist of an insert bearing mounted in a stainless-steel housing. They have a good corrosion resistance, and are suitable for applications with both constant and alternating directions of rotation. They have an inner ring extended on both sides and are locked onto the shaft by tightening a set screw on the inner ring, making them easy to mount.
- Ready to mount
- Designed for a constant and alternating rotation
- Good corrosion resistance
- Lubricated and sealed bearing
- Quick locking onto the shaft
Description
Dimensions
| Shaft diameter | 19.05 mm |
| Centre height (pillow block) | 33.3 mm |
| Housing overall width | 29 mm |
| Centre distance between bolt holes | 96.8 mm |
| Bearing width, total | 31 mm |
Performance
| Basic dynamic load rating | 10.8 kN |
| Basic static load rating | 6.55 kN |
| Limiting speed | 5 000 r/min |
| Note | Limiting speed with shaft tolerance h6 |
Properties
| Housing type | Pillow block |
| Number of bolt holes for fasteners | 2 |
| Fastening bolt hole type | Plain |
| Retaining feature, inner ring | Set screws |
| Bore type | Cylindrical |
| Rubber seating ring | Without |
| Material, housing | Stainless steel |
| Material, bearing | Stainless steel |
| Coating | Without |
| Sealing, bearing | Seal and flinger on both sides |
| Sealing type | Contact, gutter |
| Sealing, unit | Optional end cover |
| Lubricant | Grease |
| Relubrication hole | Without |
| Grease fitting | Without |
