C 6915-2CS5V/C3
Full complement CARB toroidal roller bearing with integral sealingCARB toroidal roller bearings are unique: as well as accommodating misalignment without increased stress levels, they also provide frictionless axial movement within the bearing in the non-locating position in self-aligning bearing arrangements. This bearing has a lower speed rating and is sealed to minimize the need for lubrication and extend service life.
- Accommodate misalignment and axial displacement within the bearing
- High radial load carrying capacity
- Provide frictionless axial movement
- Long bearing system life
- Sealed for increased reliability
Description
| SKF performance class | SKF Explorer |
| Bore type | Cylindrical |
Dimensions
| Bore diameter | d | 75 mm |
|---|---|---|
| Outside diameter | D | 105 mm |
| Width | B | 54 mm |
| Shoulder diameter of inner ring | d2 | ≈ 83.6 mm |
| Shoulder or recess diameter of outer ring | D1 | ≈ 95.5 mm |
| Permissible axial displacement | s2 | max. 7.1 mm |
| Chamfer dimension | r1,2 | min. 1 mm |
Abutment dimensions
| Diameter of shaft abutment | da | min. 79.6 mm |
|---|---|---|
| Diameter of shaft abutment | da | max. 83.6 mm |
| Diameter of housing abutment | Da | min. 86 mm |
| Abutment diameter housing | Da | max. 100.4 mm |
| Radius of fillet | ra | max. 1 mm |
Calculation data
| Basic dynamic load rating | C | 204 kN |
|---|---|---|
| Basic static load rating | C0 | 325 kN |
| Fatigue load limit | Pu | 37.5 kN |
| Limiting speed | 140 r/min | |
| Misalignment factor | k1 | 0.073 |
| Internal clearance factor | k2 | 0.154 |
Mass
| Mass | 1.4 kg |
Tolerances and clearances
Bearing interfaces
