331090 E/C700
Four-row tapered roller bearingFour-row tapered roller bearings can accommodate combined heavy radial and axial loads at low to moderate speeds. They are used almost exclusively in work roll applications such as rolling mills. SKF manufactures four-row tapered roller bearings in TQO and TQI designs, in many variants and with different features.
- Very high radial load carrying capacity
- Accommodate axial loads in both directions
- Axial space-saving solution for roll necks
- Low friction
- Long service life
Description
| Design variant/feature | TQON/GW |
| Bore type | Cylindrical with helical groove |
Dimensions
| d | 489.026 mm | Bore diameter |
|---|---|---|
| D | 634.873 mm | Outside diameter |
| B | 320.675 mm | Total bearing width over inner rings |
| T | 320.675 mm | Total bearing width over outer rings |
| d1 | ≈ 522 mm | Abutment diameter shaft |
| D1 | ≈ 584 mm | Abutment diameter housing |
| r3,4 | min. 3.3 mm | Outer ring radius (chamfer) |
Calculation data
| Basic dynamic load rating | C | 6 300 kN |
|---|---|---|
| Basic static load rating | C0 | 14 600 kN |
Mass
| Mass bearing | 265 kg |
Tolerances and clearances
Bearing data
- Tolerances: metric bearings (Normal and CL7C), inch bearings
- Internal clearance
Bearing interfaces
