C 2208 V
Full complement CARB toroidal roller bearingCARB toroidal roller bearings are unique: as well as accommodating misalignment without increased stress levels, they also provide frictionless axial movement within the bearing in the non-locating position in self-aligning bearing arrangements. This full complement bearing, which has a lower speed rating, uses as many rollers as possible, giving it the highest possible load rating.
- Accommodate misalignment and axial displacement within the bearing
- Very high radial load carrying capacity
- Provide frictionless axial movement
- Long bearing system life
Description
| SKF performance class | SKF Explorer |
| Bore type | Cylindrical |
Dimensions
| d | 40 mm | Bore diameter |
|---|---|---|
| D | 80 mm | Outside diameter |
| B | 23 mm | Width |
| d2 | ≈ 52.4 mm | Shoulder diameter of inner ring |
| D1 | ≈ 69.9 mm | Shoulder or recess diameter of outer ring |
| s1 | max. 7.1 mm | Permissible axial displacement |
| s2 | max. 4.1 mm | Permissible axial displacement |
| r1,2 | min. 1.1 mm | Chamfer dimension |
Abutment dimensions
| da | min. 47 mm | Diameter of shaft abutment |
|---|---|---|
| da | max. 66 mm | Diameter of shaft abutment |
| Da | max. 73 mm | Abutment diameter housing |
| ra | max. 1 mm | Radius of fillet |
Calculation data
| Basic dynamic load rating | C | 102 kN |
|---|---|---|
| Basic static load rating | C0 | 104 kN |
| Fatigue load limit | Pu | 12.2 kN |
| Limiting speed | 4 500 r/min | |
| Misalignment factor | k1 | 0.093 |
| Internal clearance factor | k2 | 0.128 |
Mass
| Mass | 0.53 kg |
Tolerances and clearances
Bearing interfaces
