C 2207 KTN9
CARB toroidal roller bearing with tapered bore (1:12)CARB toroidal roller bearings are unique: as well as accommodating misalignment without increased stress levels, they also provide frictionless axial movement within the bearing in the non-locating position in self-aligning bearing arrangements. Being SKF Explorer bearings, they can accommodate higher load levels and provide significantly extended service life.
- Accommodate misalignment and axial displacement within the bearing
- High radial load carrying capacity
- Provide frictionless axial movement
- Long bearing system life
- Reduce noise and vibration levels
Description
| SKF performance class | SKF Explorer |
| Bore type | Tapered 1:12 |
Dimensions
| d | 35 mm | Bore diameter |
|---|---|---|
| D | 72 mm | Outside diameter |
| B | 23 mm | Width |
| d2 | ≈ 44.8 mm | Shoulder diameter of inner ring |
| D1 | ≈ 60.7 mm | Shoulder or recess diameter of outer ring |
| s1 | max. 5.7 mm | Permissible axial displacement |
| r1,2 | min. 1.1 mm | Chamfer dimension |
Abutment dimensions
| Da | min. 58.5 mm | Diameter of housing abutment |
|---|---|---|
| Da | max. 65 mm | Abutment diameter housing |
| Ca | min. 0.1 mm | Minimum width of space required in housing |
| ra | max. 1 mm | Radius of fillet |
| ||
Calculation data
| Basic dynamic load rating | C | 83 kN |
|---|---|---|
| Basic static load rating | C0 | 80 kN |
| Fatigue load limit | Pu | 9.3 kN |
| Reference speed | 9 500 r/min | |
| Limiting speed | 13 000 r/min | |
| Misalignment factor | k1 | 0.094 |
| Internal clearance factor | k2 | 0.121 |
Mass
| Mass | 0.43 kg |
Tolerances and clearances
Bearing interfaces
