51164 M
Single direction thrust ball bearingSingle direction thrust ball bearings can accommodate axial loads in one direction. They must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections. Many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.
- Separable design facilitates mounting/dismounting and maintenance inspections
- Interchangeable components
- Ground bore of shaft washers enable interference fit
Description
Dimensions
| d | 320 mm | Bore diameter |
|---|---|---|
| D | 400 mm | Outside diameter |
| H | 63 mm | Height |
| d1 | ≈ 396 mm | Outside diameter shaft washer |
| D1 | ≈ 324 mm | Inner diameter housing washer |
| r1,2 | min. 2 mm | Chamfer dimension washer |
Abutment dimensions
| da | min. 368 mm | Abutment diameter shaft |
|---|---|---|
| Da | max. 352 mm | Abutment diameter housing |
| ra | max. 2 mm | Fillet radius |
Calculation data
| Basic dynamic load rating | C | 371 kN |
|---|---|---|
| Basic static load rating | C0 | 1 860 kN |
| Fatigue load limit | Pu | 36.5 kN |
| Reference speed | 800 r/min | |
| Limiting speed | 1 100 r/min | |
| Minimum load factor | A | 18 |
Mass
| Mass bearing (including seat washer where applicable) | 19 kg |
Tolerances and clearances
Bearing data
Bearing interfaces
