NJ 1880 MP
Single row cylindrical roller bearing, NJ designSingle row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and one on the inner ring, NJ design bearings can accommodate axial displacement in one direction. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged.
- High radial load carrying capacity
- Low friction
- Long service life
- Locate the shaft axially in one direction
- Separable design
Description
Dimensions
| d | 400 mm | Bore diameter |
|---|---|---|
| D | 500 mm | Outside diameter |
| B | 46 mm | Width |
| d1 | ≈ 433 mm | Shoulder diameter of inner ring |
| D1 | ≈ 465 mm | Shoulder diameter of outer ring |
| F | 423 mm | Raceway diameter of inner ring |
| r1,2 | min. 2.1 mm | Chamfer dimension |
| s | max. 3.3 mm | Permissible axial displacement |
Abutment dimensions
| da | min. 410 mm | Diameter of spacer sleeve |
|---|---|---|
| da | max. 419 mm | Diameter of spacer sleeve |
| db | min. 436 mm | Diameter of shaft abutment |
| Da | max. 490 mm | Diameter of housing abutment |
| ra | max. 2 mm | Radius of fillet |
Calculation data
| Basic dynamic load rating | C | 572 kN |
|---|---|---|
| Basic static load rating | C0 | 1 180 kN |
| Fatigue load limit | Pu | 96.5 kN |
| Reference speed | 1 300 r/min | |
| Limiting speed | 1 900 r/min | |
| Minimum load factor | kr | 0.05 |
| Limiting value | e | 0.2 |
| Calculation factor | Y | 0 |
Mass
| Mass | 22 kg |
Tolerances and clearances
Bearing interfaces
