NJ 1876 ECMP
Single row cylindrical roller bearing, NJ designSingle row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and one on the inner ring, NJ design bearings can accommodate axial displacement in one direction. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged.
- High radial load carrying capacity
- Low friction
- Long service life
- Locate the shaft axially in one direction
- Separable design
Description
Dimensions
| d | 380 mm | Bore diameter |
|---|---|---|
| D | 480 mm | Outside diameter |
| B | 46 mm | Width |
| d1 | ≈ 415 mm | Shoulder diameter of inner ring |
| D1 | ≈ 449 mm | Shoulder diameter of outer ring |
| F | 406 mm | Raceway diameter of inner ring |
| r1,2 | min. 2.1 mm | Chamfer dimension |
| s | max. 1.5 mm | Permissible axial displacement |
Abutment dimensions
| da | min. 392 mm | Diameter of spacer sleeve |
|---|---|---|
| da | max. 400 mm | Diameter of spacer sleeve |
| db | min. 421 mm | Diameter of shaft abutment |
| Da | max. 469 mm | Diameter of housing abutment |
| ra | max. 2 mm | Radius of fillet |
| ra | max. 2 mm | Radius of fillet |
Calculation data
| Basic dynamic load rating | C | 561 kN |
|---|---|---|
| Basic static load rating | C0 | 1 120 kN |
| Fatigue load limit | Pu | 98 kN |
| Reference speed | 1 300 r/min | |
| Limiting speed | 2 000 r/min | |
| Minimum load factor | kr | 0.1 |
| Limiting value | e | 0.2 |
| Calculation factor | Y | 0.6 |
Mass
| Mass | 21 kg |
Tolerances and clearances
Bearing interfaces
