NUP 2226 ECP
Single row cylindrical roller bearing, NUP designSingle row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and one integral flange and one loose flange ring on the inner ring, NUP design bearings can locate the shaft axially in both directions. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged.
- High radial load carrying capacity
- Low friction
- Long service life
- Locate the shaft axially in both directions
- Separable design
Description
| SKF performance class | SKF Explorer |
Dimensions
| d | 130 mm | Bore diameter |
|---|---|---|
| D | 230 mm | Outside diameter |
| B | 64 mm | Width |
| d1 | ≈ 164 mm | Shoulder diameter of inner ring |
| D1 | ≈ 200.25 mm | Shoulder diameter of outer ring |
| F | 153.5 mm | Raceway diameter of inner ring |
| r1,2 | min. 3 mm | Chamfer dimension |
| r3,4 | min. 3 mm | Chamfer dimension of loose flange ring |
Abutment dimensions
| da | min. 144 mm | Diameter of spacer sleeve |
|---|---|---|
| db | min. 167 mm | Diameter of shaft abutment |
| Da | max. 215.4 mm | Diameter of housing abutment |
| ra | max. 2.5 mm | Radius of fillet |
Calculation data
| Basic dynamic load rating | C | 610 kN |
|---|---|---|
| Basic static load rating | C0 | 735 kN |
| Fatigue load limit | Pu | 83 kN |
| Reference speed | 3 200 r/min | |
| Limiting speed | 3 400 r/min | |
| Minimum load factor | kr | 0.2 |
| Limiting value | e | 0.3 |
| Calculation factor | Y | 0.4 |
Mass
| Mass | 10.7 kg |
Tolerances and clearances
Bearing interfaces
