N 224 ECP
Single row cylindrical roller bearing, N designSingle row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the inner ring and no flanges on the outer ring, N design bearings can accommodate axial displacement in both directions. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged.
- High radial load carrying capacity
- Low friction
- Long service life
- Accommodate axial displacement in both directions
- Separable design
Description
| SKF performance class | SKF Explorer |
Dimensions
| d | 120 mm | Bore diameter |
|---|---|---|
| D | 215 mm | Outside diameter |
| B | 40 mm | Width |
| d1 | ≈ 153 mm | Shoulder diameter of inner ring |
| E | 195.5 mm | Raceway diameter of outer ring |
| r1,2 | min. 2.1 mm | Chamfer dimension |
| r3,4 | min. 2.1 mm | Chamfer dimension |
| s | max. 1.9 mm | Permissible axial displacement |
Abutment dimensions
| da | min. 132 mm | Diameter of spacer sleeve |
|---|---|---|
| da | max. 192 mm | Diameter of spacer sleeve |
| Da | min. 199 mm | Diameter of housing abutment |
| Da | max. 203 mm | Diameter of housing abutment |
| ra | max. 2 mm | Radius of fillet |
| rb | max. 2 mm | Radius of fillet |
Calculation data
| Basic dynamic load rating | C | 390 kN |
|---|---|---|
| Basic static load rating | C0 | 430 kN |
| Fatigue load limit | Pu | 49 kN |
| Reference speed | 3 400 r/min | |
| Limiting speed | 3 600 r/min | |
| Minimum load factor | kr | 0.12 |
| Limiting value | e | 0.2 |
| Calculation factor | Y | 0.6 |
Mass
| Mass | 5.73 kg |
Tolerances and clearances
Bearing interfaces
