248/1800 CAK30FA/W20
Spherical roller bearingSpherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. They can be used in a modular system, including housings, sleeves and nuts.
- Accommodate misalignment
- High load carrying capacity
- Low friction and long service life
- Extensive range available sealed for increased reliability
- Increased wear resistance
Description
| SKF performance class | SKF Explorer |
| Bore type | Tapered 1:30 |
Dimensions
| d | 1 800 mm | Bore diameter |
|---|---|---|
| D | 2 180 mm | Outside diameter |
| B | 375 mm | Width |
| d2 | ≈ 1 932 mm | Shoulder diameter of inner ring |
| D1 | ≈ 2 060 mm | Shoulder/recess diameter of outer ring |
| K | 12 mm | Diameter of lubrication hole |
| r1,2 | min. 9.5 mm | Chamfer dimension |
Abutment dimensions
| Da | max. 2 146 mm | Diameter of housing abutment |
|---|---|---|
| ra | max. 8 mm | Radius of fillet |
Calculation data
| Basic dynamic load rating | C | 20 274 kN |
|---|---|---|
| Basic static load rating | C0 | 63 000 kN |
| Fatigue load limit | Pu | 3 050 kN |
| Reference speed | 75 r/min | |
| Limiting speed | 140 r/min | |
| Limiting value | e | 0.15 |
| Calculation factor | Y1 | 4.5 |
| Calculation factor | Y2 | 6.7 |
| Calculation factor | Y0 | 4.5 |
Mass
| Mass | 2 920 kg |
Tolerances and clearances
Bearing interfaces
