ZKLN0832-2RS-XL
Axial angular contact ball bearing
Axial angular contact ball bearing ZKLN..-2RS-XL, double direction, no screw mounting
Replaces
ZKLN 0832.2RS, ZKLN0832-2RS
Description
Metric
Imperial
Main Dimensions & Performance Data
| d | 8 mm | Bore diameter |
| 0 mm | Bore diameter upper tolerance | |
| -0.005 mm | Bore diameter lower tolerance | |
| D | 32 mm | Outside diameter |
| 0 mm | Outside diameter upper tolerance | |
| -0.01 mm | Outside diameter lower tolerance | |
| B | 20 mm | Width |
| 0 mm | Width upper tolerance | |
| -0.25 mm | Width lower tolerance | |
| Ca | 13,800 N | Basic dynamic load rating, axial |
| C0a | 16,300 N | Basic static load rating, axial |
| Cua | 990 N | Fatigue load limit, axial |
| nG Grease | 12,100 1/min | Limiting speed for grease lubrication |
| nϑ | 5,100 1/min | Thermally safe operating speed |
| MR | 0.08 Nm | Bearing frictional torque |
| ≈m | 88.7 g | Weight |
Mounting dimensions
| Da max | 26 mm | Maximum diameter of housing |
| da min | 11 mm | Minimum diameter shaft |
Dimensions
| d1 | 19 mm | Rib diameter inner ring |
| rmin | 0.3 mm | Minimum chamfer dimension |
| r1 min | 0.6 mm | Minimum chamfer dimension |
| α | 60 ° | Contact angle |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 120 °C | Operating temperature max. |
Additional information
| caL | 250 N/µm | Rigidity axial |
| ckL | 20 Nm/mrad | Tilting rigidity |
| Mm | 0.02 kg*cm2 | Mass moment of inertia |
| 2 µm | Axial runout | |
| ZM08 | Recommended INA precision locknut for radial locking | |
| MA | 4 Nm | Tightening torque for the recommended INA precision locknut |
| 3,468 N | Required locknut force axial |
Your current product variant
| Sealing | 2RS | Contact lip seals on both sides |
| Tolerance class | Standard | Standard |
Characteristics
