YRTSMA200

Axial/radial roller bearing

Axial/radial bearings, double direction, screw mounting, for higher speeds, with integrated absolute angular measuring system

Two retaining screws

Shaft locating washer

Inner ring

Display units

Metric

Imperial

Main Dimensions & Performance Data

d	200 mm	Bore diameter
	0 mm	Bore diameter upper tolerance
	-0.015 mm	Bore diameter lower tolerance
D	300 mm	Outside diameter
	0 mm	Outside diameter upper tolerance
	-0.018 mm	Outside diameter lower tolerance
H	51 mm	Height
C_r	94,000 N	Basic dynamic load rating, radial
C_0r	226,000 N	Basic static load rating, radial
C_a	155,000 N	Basic dynamic load rating, axial
C_0a	840,000 N	Basic static load rating, axial
n_G	1,160 1/min	Limiting speed
≈m	10 kg	Weight

Mounting dimensions

J	215 mm	Pitch circle diameter fixing holes in inner ring
J₁	285 mm	Pitch circle diameter fixing holes in outer ring
d₁	7 mm	Fixing holes diameter inner ring
d₂	11 mm	Counterbore diameter of fixing holes
a	6.2 mm	Counterbore depth of fixing holes
	46	Quantity of fixing holes inner ring
d₃	7 mm	Fixing holes diameter outer ring
	45	Quantity of fixing holes outer ring
n	48	Pitch quantity
t	7.5 °	Pitch separation angle
G	M8	Threaded extraction hole
	3	Quantity of threaded extraction hole
M_A	14 Nm	Screw tightening torque
	2	Quantity of retaining screws
t₁	4 µm	Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction.

Dimensions

H₁	30 mm	Height contact face outer ring
	0.04 mm	Height contact face outerring H1 upper tolerance
	-0.06 mm	Height contact face outerring H1 lower tolerance
H₂	21 mm	Height contact face outer ring
D_{1 max}	274.4 mm	Maximum bord diameter inner ring
D_M	274 mm	Diameter of dimensional scale on shaft locating washer
C	15 mm	Width of outer ring

Temperature range

T_min	-30 °C	Operating temperature min.
T_max	120 °C	Operating temperature max.

Additional information

c_aL	4,000 N/µm	Axial rigidity of bearing position
c_rL	1,200 N/µm	Radial rigidity of bearing position
c_kL	29,000 Nm/mrad	Tilting rigidity of bearing position
c_aL	13,600 N/µm	Axial rigidity of rolling element set
c_rL	3,900 N/µm	Radial rigidity of rolling element set
c_kL	101,000 Nm/mrad	Tilting rigidity of rolling element set
M_m	435 kg*cm2	Mass moment of inertia for rotating outer ring
M_m	667 kg*cm2	Mass moment of inertia for rotating inner ring

Downloads:

Characteristics

Title