YRTCMI180-XL

Axial/radial roller bearing

Axial / radial roller bearing. Double direction, screw mounting, with integrated incremental angle measuring ring

Two retaining screws

Shaft locating washer

Inner ring

Display units

Metric

Imperial

Main Dimensions & Performance Data

d	180 mm	Bore diameter
	0 mm	Bore diameter upper tolerance
	-0.013 mm	Bore diameter lower tolerance
D	280 mm	Outside diameter
	0 mm	Outside diameter upper tolerance
	-0.018 mm	Outside diameter lower tolerance
H	50 mm	Height
C_r	100,000 N	Basic dynamic load rating, radial
C_0r	200,000 N	Basic static load rating, radial
C_a	134,000 N	Basic dynamic load rating, axial
C_0a	730,000 N	Basic static load rating, axial
n_G	600 1/min	Limiting speed
M_R	5 Nm	Bearing friction torque at 5 1/min
≈m	8.2 kg	Weight

Mounting dimensions

J	194 mm	Pitch circle diameter fixing holes in inner ring
J₁	260 mm	Pitch circle diameter fixing holes in outer ring
d₁	7 mm	Fixing holes diameter inner ring
d₂	11 mm	Counterbore diameter of fixing holes
a	6.2 mm	Counterbore depth of fixing holes
	46	Quantity of fixing holes inner ring
d₃	7 mm	Fixing holes diameter outer ring
	45	Quantity of fixing holes outer ring
n	48	Pitch quantity
t	7.5 °	Pitch separation angle
G	M8	Threaded extraction hole
	3	Quantity of threaded extraction hole
M_A	14 Nm	Screw tightening torque
	2	Quantity of retaining screws
t₁	4 µm	Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction.

Dimensions

H₁	29 mm	Height contact face outer ring
H₂	21 mm	Height contact face outer ring
D_{1 max}	245.1 mm	Maximum bord diameter inner ring
D_M	244 mm	Diameter of dimensional scale on shaft locating washer
C	15 mm	Width of outer ring

Temperature range

T_min	-30 °C	Operating temperature min.
T_max	120 °C	Operating temperature max.

Additional information

c_aL	4,700 N/µm	Axial rigidity of bearing position
c_rL	3,600 N/µm	Radial rigidity of bearing position
c_kL	29,000 Nm/mrad	Tilting rigidity of bearing position
c_aL	13,500 N/µm	Axial rigidity of rolling element set
c_rL	5,300 N/µm	Radial rigidity of rolling element set
c_kL	88,500 Nm/mrad	Tilting rigidity of rolling element set

Downloads:

Characteristics

Title