YRTCMA460-XL

Axial/radial roller bearing

Axial/radial bearings, double direction, screw mounting, with integrated absolute angular measuring system

Two retaining screws

Shaft locating washer

Inner ring

Display units

Metric

Imperial

Main Dimensions & Performance Data

d	460 mm	Bore diameter
	0 mm	Bore diameter upper tolerance
	-0.023 mm	Bore diameter lower tolerance
D	600 mm	Outside diameter
	0 mm	Outside diameter upper tolerance
	-0.028 mm	Outside diameter lower tolerance
H	70 mm	Height
C_r	265,000 N	Basic dynamic load rating, radial
C_0r	880,000 N	Basic static load rating, radial
C_a	290,000 N	Basic dynamic load rating, axial
C_0a	2,550,000 N	Basic static load rating, axial
n_G	150 1/min	Limiting speed
M_R	25 Nm	Bearing friction torque at 5 1/min
≈m	45.2 kg	Weight

Mounting dimensions

J	482 mm	Pitch circle diameter fixing holes in inner ring
J₁	580 mm	Pitch circle diameter fixing holes in outer ring
d₁	9.3 mm	Fixing holes diameter inner ring
d₂	15 mm	Counterbore diameter of fixing holes
a	8.2 mm	Counterbore depth of fixing holes
	46	Quantity of fixing holes inner ring
d₃	9.3 mm	Fixing holes diameter outer ring
	45	Quantity of fixing holes outer ring
n	48	Pitch quantity
t	7.5 °	Pitch separation angle
G	M12	Threaded extraction hole
	3	Quantity of threaded extraction hole
M_A	34 Nm	Screw tightening torque
	2	Quantity of retaining screws
t₁	6 µm	Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction.

Dimensions

H₁	46 mm	Height contact face outer ring
	0.06 mm	Height contact face outerring H1 upper tolerance
	-0.06 mm	Height contact face outerring H1 lower tolerance
H₂	24 mm	Height contact face outer ring
	0.03 mm	Height contact face outerring H2 upper tolerance
	-0.03 mm	Height contact face outerring H2 lower tolerance
D_{1 max}	560.9 mm	Maximum bord diameter inner ring
D_M	560 mm	Diameter of dimensional scale on shaft locating washer
C	22 mm	Width of outer ring

Temperature range

T_min	-30 °C	Operating temperature min.
T_max	120 °C	Operating temperature max.

Additional information

c_aL	12,000 N/µm	Axial rigidity of bearing position
c_rL	6,500 N/µm	Radial rigidity of bearing position
c_kL	429,000 Nm/mrad	Tilting rigidity of bearing position
c_aL	43,000 N/µm	Axial rigidity of rolling element set
c_rL	17,000 N/µm	Radial rigidity of rolling element set
c_kL	1,543,000 Nm/mrad	Tilting rigidity of rolling element set

Downloads:

Characteristics

Title