YRTC650-XL

Axial/radial roller bearing

Axial/radial bearings, double direction, for screw mounting

Two retaining screws

Display units

Metric

Imperial

Main Dimensions & Performance Data

d	650 mm	Bore diameter
	0 mm	Bore diameter upper tolerance
	-0.038 mm	Bore diameter lower tolerance
D	870 mm	Outside diameter
	0 mm	Outside diameter upper tolerance
	-0.05 mm	Outside diameter lower tolerance
H	122 mm	Height
C_r	455,000 N	Basic dynamic load rating, radial
C_0r	1,300,000 N	Basic static load rating, radial
C_a	910,000 N	Basic dynamic load rating, axial
C_0a	6,800,000 N	Basic static load rating, axial
n_G	70 1/min	Limiting speed
M_R	70 Nm	Bearing friction torque at 5 1/min
≈m	165 kg	Weight

Mounting dimensions

J	680 mm	Pitch circle diameter fixing holes in inner ring
J₁	830 mm	Pitch circle diameter fixing holes in outer ring
d₁	14 mm	Fixing holes diameter inner ring
d₂	20 mm	Counterbore diameter of fixing holes
a	13 mm	Counterbore depth of fixing holes
	46	Quantity of fixing holes inner ring
d₃	14 mm	Fixing holes diameter outer ring
	42	Quantity of fixing holes outer ring
n	48	Pitch quantity
t	7.5 °	Pitch separation angle
G	M12	Threaded extraction hole
	6	Quantity of threaded extraction hole
M_A	116 Nm	Screw tightening torque
	2	Quantity of retaining screws
t₁	10 µm	Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction.

Dimensions

H₁	78 mm	Height contact face outer ring
	0.25 mm	Height contact face outerring H1 upper tolerance
	-0.25 mm	Height contact face outerring H1 lower tolerance
H₂	44 mm	Height contact face outer ring
	0.25 mm	Height contact face outerring H2 upper tolerance
	-0.25 mm	Height contact face outerring H2 lower tolerance
D_{1 max}	800 mm	Maximum bord diameter inner ring
C	34 mm	Width of outer ring

Temperature range

T_min	-30 °C	Operating temperature min.
T_max	120 °C	Operating temperature max.

Additional information

c_aL	20,600 N/µm	Axial rigidity of bearing position
c_rL	7,300 N/µm	Radial rigidity of bearing position
c_kL	1,193,000 Nm/mrad	Tilting rigidity of bearing position
c_aL	51,400 N/µm	Axial rigidity of rolling element set
c_rL	8,200 N/µm	Radial rigidity of rolling element set
c_kL	3,554,000 Nm/mrad	Tilting rigidity of rolling element set

Downloads:

Characteristics

Title