KRE16
Yoke type track roller
Stud type track rollers KRE..-PP, with axial guidance, with eccentric collar, plastic axial plain washers on both sides
Replaces
KRE 16
Description
Metric
Imperial
Main Dimensions & Performance Data
| D | 16 mm | Outside diameter |
| d1 | 6 mm | Fit diameter of roller stud / stud |
| B | 28 mm | Width |
| Cr w | 3,200 N | Basic dynamic load rating, radial |
| C0r w | 3,450 N | Basic static load rating, radial |
| Cur w | 465 N | Fatigue load limit, radial |
| nD G | 14,000 1/min | Speed on permanent grease lubrication |
| ≈m | 20.208 g | Weight |
Dimensions
| B1 | 12.2 mm | Witdh of thrust washer |
| B2 | 16 mm | Bolt/stud length effectively |
| C | 11 mm | Width, outer ring |
| C1 | 0.6 mm | Protrusion outer ring to thrust washer |
| rmin | 0.15 mm | Minimum chamfer dimension |
| d2 | 12.5 mm | Stop diameter of thrust washer |
| G | M6 | Thread |
| IG | 8 mm | Thread length |
| de | 9 mm | Diameter of eccentric |
| Be | 7 mm | Width, eccentric |
| e | 0.5 mm | Eccentricity |
Additional information
| NIPA1 | Drive-fit lubrication nipple | |
| 1.5 mm | Protrusion lubrication nipple | |
| MA | 3 Nm | Tightening torque nut |
Downloads:
Your current product variant
| Sealing | Gap seal on both sides | |
| Outer Ring profile | R500 | |
| Grease nipples | Drive-fit lubrication nipple unmounted 1x | |
| Assembling aid head | Mounting slot |
