Description
Metric
Imperial
Main Dimensions & Performance Data
| d | 35 mm | Bore diameter |
| D | 80 mm | Outside diameter |
| B | 21 mm | Width |
| Cr | 45,500 N | Basic dynamic load rating, radial |
| C0r | 27,500 N | Basic static load rating, radial |
| Cur | 1,910 N | Fatigue load limit, radial |
| nG | 5,300 1/min | Limiting speed |
| ≈m | 0.474 kg | Weight |
Mounting dimensions
| da min | 44 mm | Minimum diameter of shaft shoulder |
| Da max | 71 mm | Maximum diameter of housing shoulder |
| Db max | 74.4 mm | Maximum diameter of housing shoulder |
| ra max | 1.5 mm | Maximum fillet radius of shaft |
| ra1 max | 1 mm | Maximum fillet radius of housing |
Dimensions
| rmin | 1.5 mm | Minimum chamfer dimension |
| r1 min | 1 mm | Minimum chamfer dimension |
| D1 | 63 mm | Shoulder diameter on outer ring wide side face |
| D2 | 65.6 mm | Caliber diameter on outer ring wide side face |
| D3 | 73.9 mm | Caliber diameter on outer ring small side face |
| d1 | 53.1 mm | Shoulder diameter on inner ring wide side face |
| d2 | 48.7 mm | Caliber diameter on inner ring wide side face |
| a | 35 mm | Distance between the apexes of the pressure cones |
| α | 40 ° | Contact angle |
Temperature range
| Tmin | -20 °C | Operating temperature min. |
| Tmax | 100 °C | Operating temperature max. |
Your current product variant
| Design variant | B | Design variant B |
| Sealing | 2RS | Contact seal on both sides |
| Cage | TVP | solid cage made of glass-fiber reinforced polyamid PA66 |
| Tolerance class | P6 | Class6 (P6), better than PN |
| Lubricant | GA13 | Ball bearing and insert bearing grease, standard for D>62mm |
| Dimensional / heat stabilization | S0 | Rings dimensional stabilized up to 150° |
Characteristics
