7303-B-XL-2RS-TVP
Angular contact ball bearing
Angular contact ball bearing 73..-B-XL-2RS-TVP, single row, X-life, seals, plastic cage
Replaces
7303B.2RS.TVP, 7303-B-2RS-TVP
Description
Metric
Imperial
Main Dimensions & Performance Data
| d | 17 mm | Bore diameter |
| D | 47 mm | Outside diameter |
| B | 14 mm | Width |
| Cr | 18,700 N | Basic dynamic load rating, radial |
| C0r | 9,000 N | Basic static load rating, radial |
| Cur | 620 N | Fatigue load limit, radial |
| nG | 9,800 1/min | Limiting speed |
| ≈m | 107 g | Weight |
Mounting dimensions
| da min | 22.6 mm | Minimum diameter of shaft shoulder |
| Da max | 41.4 mm | Maximum diameter of housing shoulder |
| Db max | 42.8 mm | Maximum diameter of housing shoulder |
| ra max | 1 mm | Maximum fillet radius of shaft |
| ra1 max | 0.6 mm | Maximum fillet radius of housing |
Dimensions
| rmin | 1 mm | Minimum chamfer dimension |
| r1 min | 0.6 mm | Minimum chamfer dimension |
| D1 | 35.5 mm | Shoulder diameter on outer ring wide side face |
| D2 | 37.2 mm | Caliber diameter on outer ring wide side face |
| D3 | 42.6 mm | Caliber diameter on outer ring small side face |
| d1 | 29.2 mm | Shoulder diameter on inner ring wide side face |
| d2 | 26.1 mm | Caliber diameter on inner ring wide side face |
| a | 20 mm | Distance between the apexes of the pressure cones |
| α | 40 ° | Contact angle |
Temperature range
| Tmin | -20 °C | Operating temperature min. |
| Tmax | 100 °C | Operating temperature max. |
Your current product variant
| Design variant | B | Design variant B |
| Sealing | 2RS | Contact seal on both sides |
| Cage | TVP | solid cage made of glass-fiber reinforced polyamid PA66 |
| Tolerance class | P6 | Class6 (P6), better than PN |
| Lubricant | GA14 | Ball bearing grease, low noise, standard for D<=62mm |
| Dimensional / heat stabilization | S0 | Rings dimensional stabilized up to 150° |
Characteristics
